RS-15 Oxygen Bottle Installation
by
Tony Burton

  1. Deck cut in and reglassed to follow contour of bottle (layer of rubber glued on for padding).

    2. Neck-end area wraps a bit over the curved part of the bottle neck, and the built-up pad for the bottle bottom prevents lateral movement. Made your depression deep enough so your bottle clears the turtle-deck cover.

  2. Curved aluminum sheet inspection panel for gear enclosure.

  3. Standard strap clamps cut short and bolted to spar carry through angles.

Editor's Note: As you can see, C-GPUB has the HP-18 style wing.